FreeSource : CyberSkunk/PPTPDConfig

Говорят, что нужно apt-get install kernel-feat-net-ppp-mppe, но я не ставил.
apt-get install pptpd (требует ppp, что не удивляет)
vim /etc/pptpd.conf

################################################################################
#
# Sample PoPToP configuration file
#
# for PoPToP version 1.1.4-b3
#
################################################################################

# TAG: speed
#
#       Specifies the speed for the PPP daemon to talk at.
#
speed 115200

# TAG: option
#
#       Specifies the location of the PPP options file.
#       By default PPP looks in '/etc/ppp/options'
#
option /etc/ppp/options.pptpd

# TAG: stimeout
#
#       Specifies timeout (in seconds) on starting ctrl connection
#
# stimeout 10

# TAG: debug
#
#       Turns on (more) debugging to syslog
#
#debug

# TAG: bcrelay <if>
#
#       Turns on broadcast relay to clients from interface <if>
#
#bcrelay eth1

# TAG: localip
# TAG: remoteip
#
#       Specifies the local and remote IP address ranges.
#
#       You can specify single IP addresses seperated by commas or you can
#       specify ranges, or both. For example:
#
#               192.168.0.234,192.168.0.245-249,192.168.0.254
#
#       IMPORTANT RESTRICTIONS:
#
#       1. No spaces are permitted between commas or within addresses.
#
#       2. If you give more IP addresses than MAX_CONNECTIONS, it will
#          start at the beginning of the list and go until it gets
#          MAX_CONNECTIONS IPs. Others will be ignored.
#
#       3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
#          you must type 234-238 if you mean this.
#
#       4. If you give a single localIP, that's ok - all local IPs will
#          be set to the given one. You MUST still give at least one remote
#          IP for each simultaneous client.
#
localip 192.168.0.1
remoteip 192.168.0.234-238,192.168.0.245
# or
#localip 192.168.0.234-238,192.168.0.245
#remoteip 192.168.1.234-238,192.168.1.245

минимальные изменения.
vim /etc/ppp/options.pptpd

## CHANGE TO SUIT YOUR SYSTEM
lock

## turn pppd syslog debugging on
#debug

## change 'pptpd' to whatever you specify as your server name in chap-secrets
name pptpd

proxyarp
bsdcomp 0

require-mppe-128
require-mschap-v2

Также минимальные изменения.
Добавляем пользователя с паролем в /etc/ppp/chap-secrets

# Secrets for authentication using CHAP
# client        server  secret                  IP addresses
user    pptpd   1234    192.168.0.234

service pptpd start

Готово.

Страницы, ссылающиеся на данную: CyberSkunk
CyberSkunk/VPNAuthorisationAgainstLDAP