Вход:  Пароль:  
FreeSource: Comment269 ...
Free Source | Каталог | Изменения | НовыеКомментарии | Пользователи | Регистрация |
This is a comment on Alt Linux / Releases / 24 / Master Info, posted by Michael Shigorin at 2005-05-29 18:30:25

упс... не клеится файлик.


diff -uNr rc.d.orig/init.d/halt rc.d/init.d/halt


rc.d.orig/init.d/halt 2004–03–05 02:28:34 +1200
+++ rc.d/init.d/halt 2005–05–29 14:33:46 +1300
@@ -102,6 +102,14 @@
“Unmounting filesystem” \
«Unmounting filesystem (retry)"


+# LVM Shutdown
+VGCHANGE=/sbin/vgchange
+if [ -x "$VGCHANGE" -a -s /etc/lvmtab ]; then
+ if [ -e /proc/lvm ]; then
+ action “Setting up LVM:" "$VGCHANGE” -a n
+ fi
+fi
+
# Turn off raid.
RAIDSTOP=/sbin/raidstop
if [ -x "$RAIDSTOP" -a -f /etc/raidtab ]; then
diff -uNr rc.d.orig/rc.sysinit rc.d/rc.sysinit


rc.d.orig/rc.sysinit 2004–03–06 01:25:28 +1200
+++ rc.d/rc.sysinit 2005–05–29 14:29:13 +1300
@@ -81,6 +81,75 @@
# Set the system clock (when /etc/adjtime is missing).
[ -s /etc/adjtime ] || /etc/init.d/clock start +# Activate EVMS +EVMS_ACTIVE= +STARTEVMS=/sbin/startevms +if [ -x "$STARTEVMS" ] && ! fgrep -iwqs noevms /proc/cmdline; then + action "Starting up EVMS:" "$STARTEVMS" init + EVMS_ACTIVE=1 +fi + +# Add raid devices +if [ -z "$EVMS_ACTIVE" ] && [ -f /proc/mdstat -a -s /etc/raidtab ] && ! fgrep -iwqs noraidtab /proc/cmdline; then + echo -n "Starting up RAID devices: " + + rc=0 + + for i in `grep -s "^raiddev" /etc/raidtab | awk '{print $2}'`; do + RAIDDEV="${i##*/}" + RAIDSTAT=`grep -s "^$RAIDDEV : active" /proc/mdstat` + if [ -z "$RAIDSTAT" ]; then + # Try raidstart first...if that fails then + # fall back to raidadd, raidrun. If that + # also fails, then we drop to a shell + RESULT=1 + ExecIfExecutable /sbin/raidstart "$i" + RESULT=$? + if [ $RESULT -gt 0 ]; then + ExecIfExecutable /sbin/raid0run "$i" + RESULT=$? + fi + if [ $RESULT -gt 0 ]; then + ExecIfExecutable /sbin/raidadd "$i" + ExecIfExecutable /sbin/raidrun "$i" + RESULT=$? + fi + if [ $RESULT -gt 0 ]; then + rc=1 + fi + fi + echo -n "$RAIDDEV " + done + echo + + # A non-zero return means there were problems. + if [ $rc -gt 0 ]; then + echo + echo + echo "*** An error occurred during the RAID startup" + echo "*** Dropping you to a shell; the system will reboot" + echo "*** when you leave the shell." + + PS1="(RAID Repair) \# # "; export PS1 + sulogin + + echo "Unmounting file systems" + umount -arnf + mount -n -o remount,ro / + echo "Automatic reboot in progress." + reboot -f + fi +fi + +# LVM Setting +VGCHANGE=/sbin/vgchange +if [ -x "$VGCHANGE" -a -s /etc/lvmtab ]; then + modprobe lvm-mod >/dev/null 2>&1 + if [ -e /proc/lvm ]; then + action "Setting up LVM:" "$VGCHANGE" -a y + fi +fi + # Activate swapping. action "Activating swap partitions:" swapon -a -e @@ -114,15 +183,6 @@ fsckoptions="-V $fsckoptions" fi -# LVM Setting -VGCHANGE=/sbin/vgchange -if [ -x "$VGCHANGE" -a -s /etc/lvmtab ]; then – modprobe lvm-mod >/dev/null 2>&1 – if [ -e /proc/lvm ]; then – action "Setting up LVM:" "$VGCHANGE" -a y – fi -fi – _RUN_QUOTACHECK=0 ROOTFSTYPE=`fgrep ' / ' /proc/mounts |tail -1 |cut -d' ' -f3` if [ -z "$fastboot" -a "$ROOTFSTYPE" != nfs ]; then @@ -263,66 +323,6 @@ setsysfont >/dev/null 2>&1 && SETSYSFONT_DONE=1 || SETSYSFONT_DONE=
fi


-# Activate EVMS
-EVMS_ACTIVE=
-STARTEVMS=/sbin/startevms
-if [ -x "$STARTEVMS" ] && ! fgrep -iwqs noevms /proc/cmdline; then
– action “Starting up EVMS:" "$STARTEVMS” init
– EVMS_ACTIVE=1
-fi
-
-# Add raid devices
-if [ -z "$EVMS_ACTIVE" ] && [ -f /proc/mdstat -a -s /etc/raidtab ] && ! fgrep -iwqs noraidtab /proc/cmdline; then
– echo -n “Starting up RAID devices: "
-
– rc=0

– for i in `grep -s "^raiddev" /etc/raidtab | awk '{print $2}'`; do
– RAIDDEV="${i##*/}"
– RAIDSTAT=`grep -s "^$RAIDDEV : active" /proc/mdstat`
– if [ -z "$RAIDSTAT" ]; then
– # Try raidstart first...if that fails then
– # fall back to raidadd, raidrun. If that
– # also fails, then we drop to a shell
– RESULT=1
Exec If Executable? /sbin/raidstart "$i"
– RESULT=$?
– if [ $RESULT -gt 0 ]; then
Exec If Executable? /sbin/raid0run "$i"
– RESULT=$?
– fi
– if [ $RESULT -gt 0 ]; then
Exec If Executable? /sbin/raidadd "$i"
Exec If Executable? /sbin/raidrun "$i"
– RESULT=$?
– fi
– if [ $RESULT -gt 0 ]; then
– rc=1
– fi
– fi
– echo -n "$RAIDDEV "
– done
– echo
-
– # A non-zero return means there were problems.
– if [ $rc -gt 0 ]; then
– echo
– echo
– echo "*** An error occurred during the RAID startup"
– echo "*** Dropping you to a shell; the system will reboot"
– echo "*** when you leave the shell."
-
– PS1="(RAID Repair) \# # “; export PS1
– sulogin
-
– echo “Unmounting file systems”
– umount -arnf
– mount -n -o remount,ro /
– echo “Automatic reboot in progress.”
– reboot -f
– fi
-fi
-
_RUN_QUOTACHECK=0
# Check filesystems
# (pixel) do not check loopback files, will be done later (aren't available yet)


 
Файлов нет. [Показать файлы/форму]
Комментариев нет. [Показать комментарии/форму]